Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Np300
    4. : How to reset the service reminder on the Nissan NP300

Nissan Np300 - Video tutorial

Model: Nissan Np300 D22 - Years 1997-2022
Part: Instrument cluster
Operation: How to reset the service reminder on the Nissan NP300

In this video we can see how to reset the service light on the Nissan NP300: we get into the car and close the doors, then we activate the instrument panel, without needing to start the engine. We scroll through the menu on the display using the selection buttons located on the right side of the steering wheel. Select "remaining distance to next maintenance". Press and hold any of the two buttons for ten seconds and wait for the display to stop flashing. Release the button, then turn off the instrument panel. The procedure is complete: if it was not successful, drive the vehicle for 15/20 km, then turn off the engine for a minute and repeat the procedure.


Posted on 29 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos