Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the EOBD Port on the Nissan Micra K11

Model: Nissan Micra K11 - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we can see the location of the EOBD (European On Board Diagnostic) port on the Nissan Micra K11. The version shown in the video is a right-hand drive; in left-hand drive models, the diagnostic port is located in the same mirrored position on the other side of the vehicle.

It is found to the right (or left, depending on the drive type) below the dashboard, and is not covered by any cover, making it easily visible.

Remember that the EOBD port is used for diagnosing faults stored in the ECU by professionals, but we can also do this ourselves using a simple OBD11 device.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Nissan Micra K11
How to Replace the Fuel Filter on a Nissan Micra K11
Nissan Micra (1992-2002 / K11) In today's tutorial, you will learn how to remove and replace the fuel filter on a first series Nissan Micra K11 in simple and quick steps. First, op…
Replacing Instrument Cluster Bulbs on a Nissan Micra K11
Replacing Instrument Cluster Bulbs on a Nissan Micra K11
Nissan Micra (1992-2002 / K11) In this video tutorial, you will learn how to remove and replace the bulbs in the instrument cluster of a Nissan Micra K11. First, get inside the veh…
How to Reset the Service Light on a Nissan Micra K11
How to Reset the Service Light on a Nissan Micra K11
Nissan Micra (1992-2002 / K11) Today, I will show you how to reset the service light on a Nissan Micra model K11, produced from 1992 to 2002. To perform the reset, close all the do…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos