Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Learn how to remove the door panel to replace the door opening lever on a Nissan Qashqai. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to pry up the top of the door opening lever, then disconnect the piece as shown in the video and remove the switch panel from the handle.

Begin unscrewing the door's fastening screws with a screwdriver (disconnect the power connectors). Use a plastic lever to unclip all the clips around the perimeter of the door.

Finally, pull the panel away using your hands. Remove any remaining clips from the door panel.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to remove the front door panel of the Nissan Qashqai
How to remove the front door panel of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Following these simple steps, we will see how to disassemble and replace the front door panel of the Nissan Qashqai. First, open the front door of th…
How to Remove the Door Panel on Nissan Qashqai
How to Remove the Door Panel on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Want to remove the covering panel of a Nissan Qashqai? Here’s how to disassemble the covering panel. Open the door and locate the securing screws ins…
Removing the Front Door Panel on the Nissan Qashqai 2018
Removing the Front Door Panel on the Nissan Qashqai 2018
Nissan Qashqai (2014-2022 / J11) Let’s look at removing the door panel of the Nissan Qashqai. Remove the cover panel if damaged or if you need to work inside the door. Remove the tri…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos