Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Navara

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light related to the service interval is a very simple operation that takes only a few minutes, especially for a Nissan Navara. To reset, press the button located to the left of the instrument cluster display and then turn on the ignition.

Keep the button pressed until the display starts flashing, then release and press it again to set the new mileage for the next service. Finally, restart the instrument cluster.

Turn it off and then restart.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Navara NP300
How to Reset the Service Light on a Nissan Navara NP300
Nissan Navara (2014-2024 / D23) Due to a minor electronic error, it may happen that the service light on your Nissan Navara NP300 does not turn off even after correctly performing t…
How to Reset the Service Light on a 2013 Nissan Navara
How to Reset the Service Light on a 2013 Nissan Navara
Nissan Navara (2005-2015 / D40) If you own a 2013 Nissan Navara and want to know how to manually reset the service light, read this guide and follow the steps. First, get in the car…
How to Reset the Service Light on the Nissan Navara
How to Reset the Service Light on the Nissan Navara
Nissan Navara (2005-2015 / D40) Resetting the service light on the Nissan Navara is really straightforward and takes just a few seconds to complete the entire procedure. Just follow…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos