Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Navara NP300

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

Due to a minor electronic error, it may happen that the service light on your Nissan Navara NP300 does not turn off even after correctly performing the regular service. In this case, you need to proceed with the manual reset of the light, and in the following guide, you will learn how to do it. First, turn on the ignition and press the menu button on the left side of the steering wheel several times to access the settings screen.

At this point, select "Maintenance" and then "Oil control system". Finally, proceed with the reset of the light.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Nissan Navara NP300
How to reset the service light on the Nissan Navara NP300
Nissan Navara (2014-2024 / D23) If the service light on the instrument panel of your Nissan Navara NP300 continues to come on despite having recently had the car serviced, it means …
Where to Find the Jack on a Nissan Navara NP300
Where to Find the Jack on a Nissan Navara NP300
Nissan Navara (2014-2024 / D23) On the Nissan Navara NP300, the jack and all other tools needed to remove a wheel are located in a compartment under the rear bench seat. To access t…
How to reset the service light of the Nissan Navara NP 300
How to reset the service light of the Nissan Navara NP 300
Nissan Navara (2014-2024 / D23) The following video tutorial shows us the steps to be carried out independently to reset the maintenance light of the Nissan Navara NP300. To reset t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos