Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Test for checking the instrument panel of the Nissan Navara D40 version.

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Instrument cluster
Operation: Test for checking the instrument panel of the Nissan Navara D40 version.

In this video, we see how to test the proper functioning of the instrument panel of the Nissan Navara. We need the button located on the panel itself, on the lower left side near the water temperature. With the key in the "off" position, press and hold the knob on the left side of the instrument panel for five seconds, then turn on the panel and you will see the word "test" on the panel, and you will see that the indicators will perform a functionality test. Release the button, then press it again and it will perform the bulb test: you will see the word "test" again on the display, and with each test, the indicators will move again; with each press of the button, a new test will be performed.


Posted on 2 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - How to reset the Adblue warning light on Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the Nissan Navara instrument cluster? Read Answer
    • Navara 2005-2015 - What problems have been found on the Nissan Navara instrument cluster? Read Answer
    • Navara 2014-2023 - How to reset the service light on the Nissan Navara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos