Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change indicator light on the Nissan Navara D40

Model: Nissan Navara D40 - Years 2005-2015
Part: Service warning light

In this video posted below, we are shown the procedure to reset the oil change indicator light on the Nissan Navara D40. We recommend resetting it only after changing the oil. To perform this procedure, first insert the key without starting the engine or turning on the ignition. Then press and hold the button on the dashboard, while keeping it pressed, start the ignition and wait for the light to start flashing. When the light starts flashing, release the button and press it once to confirm the reset. At this point, the procedure will be complete and you can restart the ignition to verify that the procedure was carried out correctly.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Interval on a Nissan Navara D40
How to Reset the Service Interval on a Nissan Navara D40
Nissan Navara (2005-2015 / D40) In today's article, we will see how to reset the service interval light on the Nissan Navara D40. This procedure is useful if the light remains on af…
How to reset the oil light on the Nissan Navara D40 version
How to reset the oil light on the Nissan Navara D40 version
Nissan Navara (2005-2015 / D40) In this video, we see how to reset the low oil level indicator on a Nissan Navara D40 version; this message appears after maintenance or an oil chang…
How to Reset the Oil Change Light on Nissan Navara D40
How to Reset the Oil Change Light on Nissan Navara D40
Nissan Navara (2005-2015 / D40) Thanks to this useful video tutorial, you can see how to reset the oil change light on a Nissan Navara, model D40, produced from 2005 to 2015. The pr…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos