Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Dashboard of the Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Dashboard

See other generations:
Video tutorial

This guide provides the main instructions on how to remove the entire dashboard on the Nissan Navara; this will also be useful for replacing the cabin heater radiator. First, get in the vehicle and start by removing the cover and the gear lever knob; then, detach all the plastics from the centre tunnel, unscrewing all the fastening screws, as shown in the video.

At this point, remove the dashboard components, as well as the steering wheel, the radio, the climate control switches, and the instrument panel (disconnecting the various wiring), following the video tutorial to the end!


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Nissan Navara (2005-2015 / D40) Before you can begin, disconnect the vehicle's battery to work safely, then sit in the driver's seat of your Nissan Navara. Start by unscrewing and r…
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…
Nissan Navara (2014-2024 / D23) Knowing the exact location of the OBD2 port on your Nissan Navara D23 is very important as it allows you to easily connect any compatible diagnostic …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos