Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : To reset the service light on the 2013 Nissan Navara.

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Instrument cluster
Operation: To reset the service light on the 2013 Nissan Navara.

If you own a 2013 Nissan Navara and want to learn how to manually reset the service indicator, all you have to do is read the following guide and follow the steps. First, get in the car and reach the driver's seat. Start the instrument panel and simultaneously press and hold the button located in the lower right corner of the dashboard. Wait a few seconds and as soon as the service indicator turns off, release the button. At this point, the procedure is successfully completed and you can turn off the instrument panel.


Posted on 1 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - How to reset the Adblue warning light on Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the Nissan Navara instrument cluster? Read Answer
    • Navara 2005-2015 - What problems have been found on the Nissan Navara instrument cluster? Read Answer
    • Navara 2014-2023 - How to reset the service light on the Nissan Navara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos