Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Fuse Box Located and How to Access it on a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuse box

See other generations:
Video tutorial

The fuse box is a crucial component of the car's electrical system, containing fuses that protect various circuits. Located in the engine compartment of your Nissan Qashqai, it is essential to open the bonnet to access it. Once opened, you will find the engine cover protecting the fuse box. By removing this cover, you will gain access to the fuse box. From here, you can identify and check the fuses to verify their condition or replace them if necessary.

Be sure to follow the owner's manual instructions carefully and handle the fuses with care to avoid damaging the car's electrical system.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) If you own a Nissan Qashqai J10 (2008) and want to find out where the fuse box is located, simply read this mini guide carefully to understand how to…
Nissan Qashqai (2006-2014 / J10) The following video tutorial shows us the location of the fuse box and OBD socket of the Nissan Qashqai model J10. The OBD socket is located behind t…
Nissan Qashqai (2021-2026 / J12) The internal fuse box of the Nissan Qashqai is located inside the cabin and is very easy to access. To find it, open the driver's side door and look …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos