Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuses in a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuse box

See other generations:
Video tutorial

To locate the fuses in a Nissan Qashqai, it is useful to know that they are distributed in several points of the vehicle. One of the fuse boxes is located in the cabin, generally on the driver's side of the dashboard or underneath it, near the pedal area.

To access it, gently remove the protective panel. Another box is situated in the engine bay: lift the bonnet and locate a black plastic box, closed with a cover, near the battery.

Once the boxes are open, you can consult the diagram inside the cover, which shows the arrangement of the fuses and their usage.


Posted on 18 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) How to dismantle the fuses in the Nissan Qashqai? Here’s how to replace the fuses located in the car's cabin. Open the door, then locate the fuse box…
Nissan Qashqai (2021-2026 / J12) The internal fuse box of the Nissan Qashqai is located inside the cabin and is very easy to access. To find it, open the driver's side door and look …
Nissan Qashqai (2014-2022 / J11) Below we will discover how to access the internal fuse box of the Nissan Qashqai, along with the fuse diagram and layout. First, open the driver's si…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos