How to Reset the Service Light on a Nissan Qashqai

Model: Nissan Qashqai - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:

Video tutorial

From the instrument cluster of the Nissan Qashqai, you can completely clear the Service light by inserting the ignition key into the lock to turn on the instrument cluster: navigate within it using the button to the right of the cluster, which should be used as a dial.

At this point, locate the maintenance option and select it by pressing the button: a further screen will then show the 'Reset' option.

By selecting this option, the corresponding light will be cleared, and you can verify this by turning the display off and on again.

Posted on 13 November 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Instrument Cluster - Maintenance and repair on other vehicles

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!

by ScegliAuto

How to Reset the Service Light on a Nissan Qashqai

Related tutorials

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

More videos