Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Speakers from a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Replace the speakers in the Nissan Juke if they are damaged. Disconnect the battery terminals located in the designated compartment.

Remove the door panels to access the speakers. Use a screwdriver to remove the plastic grille covering the speaker, detach it by hand from the door panel, and disconnect any power connectors and release cables.

Use a screwdriver to unscrew the securing screws around the speaker and disconnect the power terminals located behind it. Reassemble all the parts of the new speaker (test the functionality). Refit the door panels after installation.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing Door Speakers in a Nissan Juke
Replacing Door Speakers in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) How do you replace the speakers in a Nissan Juke? Start by removing the plastic handle with a spatula or the screws inside it, then use a screwdriver…
How to Change the Language on a Nissan Juke
How to Change the Language on a Nissan Juke
Nissan Juke (2019-2026 / MK 2) Learn how to change the language on the onboard computer of a Nissan Juke (the procedure is similar for other Nissan models). Turn on the ignition an…
Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos