Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Warning light – error code

Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrument cluster, using the buttons located on the cluster (in the centre, below the display). Turn off the instrument cluster and press both electrical buttons simultaneously: hold the buttons until they start flashing, then press the right button until the text on the instrument cluster display changes. Check the instrument cluster by turning it off and on again with the ignition key.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Resetting the service light on the Nissan Juke must only be done after completing the car service operations. The steps to perform the reset are very…
How to reset the service light on the Nissan Juke
How to reset the service light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Performing the reset of the service light on the 2019 Nissan Juke is a very simple operation to do independently. To reset the light related to the c…
Resetting the Engine Oil Change Light on the Nissan Juke
Resetting the Engine Oil Change Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below are the instructions to reset the service light for the engine oil change on the Nissan Juke. First, get in the vehicle and turn on the ignitio…

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - Why did the P / S light come on in the Nissan Juke? Read answer
    • Juke 2010-2019 - What does the red engine light on the Nissan Juke mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos