Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

Resetting the service light on the Nissan Juke must only be done after completing the car service operations. The steps to perform the reset are very simple to do independently. The first step is to turn on the vehicle's instrument cluster and then press the button located to the left of the instrument cluster for about five seconds. The second step is to turn off the instrument cluster and then turn it back on to check that the reset has been successfully completed. If the operation did not yield the result shown in the video, you can repeat it a second time.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2011 Nissan Juke
How to Reset the Service Light on a 2011 Nissan Juke
Nissan Juke (2010-2019 / MK 1) Resetting the service light for the service interval on a 2011 Nissan Juke is a straightforward operation. To reset the light, turn on the ignition, …
How to Reset the Service Light on a Nissan Juke
How to Reset the Service Light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Resetting the service light on a Nissan Juke is very simple to do yourself. The first step is to put the car in first gear and press the brake pedal …
How to Reset the Service Light on a Nissan Juke
How to Reset the Service Light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Resetting the maintenance light on a Nissan Juke 1 follows a very simple procedure that can also be done independently. The first step is to turn on …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos