Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Change Light on the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Below are the instructions to reset the service light for the engine oil change on the Nissan Juke. First, get in the vehicle and turn on the ignition. Hold down the right button on the dashboard until the engine oil indicator appears, as shown in the video.

At this point, turn off the ignition and turn it back on while holding down both buttons for about five seconds. You will see that the service mileage will be reset along with the maintenance key light.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Resetting the Maintenance Light on a Nissan Juke
Resetting the Maintenance Light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) This brief tutorial shows how to reset the maintenance light, which indicates the engine oil change, on a first-generation Nissan Juke (2010-2019). T…
How to reset the service light on the Nissan Juke
How to reset the service light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today's procedure will show us how to reset the maintenance service light for the oil change of the Nissan Juke. First, we get into the car and start…
How to Change the Engine Oil on a Nissan Juke?
How to Change the Engine Oil on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To change the engine oil on a Nissan Juke, access the underside of the vehicle, near the engine compartment: here you will find the drain plug for th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos