Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement on Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Replace the engine oil on a Nissan Juke and the filter. Here's how to do it. Open the car's door and pull up the lever to open the engine compartment located at the bottom left of the dashboard, then lift the front bonnet and secure it. Raise the car on a jack and unscrew the plug of the oil sump; let the fluid drain into a container.

Unscrew the oil filter using a chain wrench. Fit a new oil filter into the designated housing.

Finally, top up with new oil and close the front bonnet. Start the car's engine and check the operation.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Nissan Juke?
How to Change the Engine Oil on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To change the engine oil on a Nissan Juke, access the underside of the vehicle, near the engine compartment: here you will find the drain plug for th…
Resetting the Engine Oil Change Light on the Nissan Juke
Resetting the Engine Oil Change Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below are the instructions to reset the service light for the engine oil change on the Nissan Juke. First, get in the vehicle and turn on the ignitio…
Where is the Oil Filter Located on a Nissan Juke?
Where is the Oil Filter Located on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this video, you will see where the oil filter is located on a Nissan Juke and how to proceed if you need to replace it, a simple operation necessa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos