Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : Engine oil

Nissan Juke - Engine oil

Engine Oil Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
How to Change the Engine Oil on a Nissan Juke?
To change the engine oil on a Nissan Juke, access the underside of the vehicle, near the engine compartment: here you will find the drain plug for the oil …Read all…
Posted on 19 August 2026 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
Engine Oil Replacement on Nissan Juke
Replace the engine oil on a Nissan Juke and the filter. Here's how to do it. Open the car's door and pull up the lever to open the engine compartment located …Read all…
Posted on 25 April 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (24) Timing belt (7) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (17) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) (17) Tire pressure warning light (4) Service warning light (79) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos