Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : Front bumper

Nissan Juke - Front bumper

Front Bumper Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
How to replace the front bumper of the Nissan Juke.
In the following video tutorial, we are shown the steps to independently replace the front bumper of a 2015 Nissan Juke. We open the front hood and, using a …Read all…
Posted on 23 November 2025 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
Removing Front Bumper on Nissan Juke
Removing a damaged front bumper? Let's see how to remove the bumper from the Nissan Juke. Remove the side impact absorbers and unscrew the screws in the wheel …Read all…
Posted on 14 April 2026 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
How to Remove the Front Bumper on a Nissan Juke
In this video, see how to remove the front bumper on a Nissan Juke: lift the bonnet and secure it. Use a plastic or metal lever to remove the securing rivets …Read all…
Posted on 19 March 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (25) Timing belt (7) Onboard computer (7) Checks and maintenance (14) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Rear bumper (1) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (18) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) Tire pressure warning light (22) Service warning light (84) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos