Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Nissan Juke.

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In the following video tutorial, we are shown the steps to independently replace the front bumper of a 2015 Nissan Juke. We open the front hood and, using a pair of pliers, remove the plastic clips that secure the front part; then, using a screwdriver, we lift the central tab. We lift the vehicle on a lift and, using a 10 mm socket wrench, unscrew the screws that secure the lower part of the bumper and remove the plastic clips with the pliers.

Using a plastic trim removal tool, we remove the cover of the outer wheel arch and the bumper to access the 10 mm side bolt that needs to be unscrewed to detach the side of the bumper.

We perform the same step on the left wheel arch. We lift the bumper by grabbing the side tabs and gently pulling upwards until it detaches.

We disconnect the central connector and move on to installing the new bumper. We connect the central connector and push the bumper inward, applying pressure on the clips.

We install the side nuts and the side clips of the bumper. We install the lower nuts of the bumper and the clips; right after that, we install the upper parts.


Posted on 23 November 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Nissan Juke?
How to Remove the Front Bumper of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To remove the front bumper of the Nissan Juke, you need to detach the outer covers of the wheel arches, allowing access to all the screws underneath:…
How to Remove the Front Bumper on a Nissan Juke
How to Remove the Front Bumper on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) In this video, see how to remove the front bumper on a Nissan Juke: lift the bonnet and secure it. Use a plastic or metal lever to remove the securin…
Removing Front Bumper on Nissan Juke
Removing Front Bumper on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Removing a damaged front bumper? Let's see how to remove the bumper from the Nissan Juke. Remove the side impact absorbers and unscrew the screws in …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos