Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Juke
  6. : Tail light

Nissan Juke - Tail light

Tail Light Nissan Juke (2019-2026 / mk 2)

Nissan Juke (2010-2019 / MK 1)
How to disassemble the rear lights in the Nissan Juke?

In this tutorial we can see how to disassemble the rear lights in the Nissan Juke, an extremely simple and quick operation. First of all, make sure that the …Read all…
Posted on 9 May 2025 by ScegliAuto
Nissan Juke (2019-2026 / MK 2)
Removing the Rear Light on the Nissan Juke

If a bulb in the rear light of the Nissan Juke burns out or if the unit is damaged and needs replacing, here's how to proceed with the removal. Open the boot …Read all…
Posted on 20 August 2026 by ScegliAuto

Tail Light Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
How to disassemble the rear lights in the Nissan Juke?

In this tutorial we can see how to disassemble the rear lights in the Nissan Juke, an extremely simple and quick operation. First of all, make sure that the …Read all…
Posted on 9 May 2025 by ScegliAuto
Nissan Juke (2019-2026 / MK 2)
Removing the Rear Light on the Nissan Juke

If a bulb in the rear light of the Nissan Juke burns out or if the unit is damaged and needs replacing, here's how to proceed with the removal. Open the boot …Read all…
Posted on 20 August 2026 by ScegliAuto

Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (25) Timing belt (7) Onboard computer (7) Checks and maintenance (14) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Rear bumper (1) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (18) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) Tire pressure warning light (22) Service warning light (84) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos