Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Juke
  6. : Disassembly of the rear light of the Nissan Juke

Nissan Juke - Video tutorial

Model: Nissan Juke MK 2 - Years 2019-2024
Part: Tail light
Operation: Disassembly of the rear light of the Nissan Juke

In case a rear lamp of the Nissan Juke burns out or gets damaged and needs to be replaced, let's see how to proceed with disassembly. We open the trunk hood, position ourselves in front of the lamp to be removed, and use a screwdriver to unscrew the two screws inside the drip channel. Now, we apply a lot of force on the lamp body to overcome the resistance of two fixing pins. Once it is detached, we disconnect the electrical connector to remove the lamp. After making the necessary adjustments, we reconnect the connector, place the lamp back into its position, securing it with the pins, and screw in the two screws.


Posted on 3 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos