Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Headlight bulb

Open the bonnet by pulling the lever located at the bottom right of the dashboard. Secure it with the provided support rod. Remove the inspection cap from the headlamp at the rear. You will find the bulbs with metal clips; pull the bulb holder out of the headlamp and extract the damaged bulb using a screwdriver and pliers. Fit the new LED bulb (ensure it is the correct type and size) and insert the bulb holder back into the headlamp housing. Close the headlamp with the inspection cap. Test the operation of the installed bulbs.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) .. Learn how to replace the front headlamp bulbs on a Nissan Juke: open the bonnet by pulling the lever located.. …
How to Replace the Headlamp Bulb on a Nissan Juke
How to Replace the Headlamp Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the headlamp bulb on a Nissan Juke, open the bonnet to access the components inside the engine bay. You need to disconnect the air duct to…
How to Replace the Front Headlight Bulb on a Nissan Juke
How to Replace the Front Headlight Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Are the front headlight bulbs on your Nissan Juke blown? Here’s how to replace them. Open the front bonnet by pulling the lever located at the bottom…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos