Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : Speaker

Nissan Juke - Speaker

Speaker Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
Replacing Door Speakers in a Nissan Juke
How do you replace the speakers in a Nissan Juke? Start by removing the plastic handle with a spatula or the screws inside it, then use a screwdriver to …Read all…
Posted on 17 May 2026 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
Replacing the Rear Speaker on Nissan Juke
In this video tutorial, you will learn how to remove and replace the rear speaker on a Nissan Juke. First, open the rear door and start by removing the door …Read all…
Posted on 15 May 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (24) Timing belt (7) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (17) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) (17) Tire pressure warning light (4) Service warning light (79) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos