Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : Handle

Nissan Juke - Handle

Handle Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
How to Replace the External Handle on the Nissan Juke?
To replace the external handle on the Nissan Juke, open the corresponding door to detach the circular rubber cover located on the side of the door: beneath …Read all…
Posted on 25 October 2026 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
How to Replace the Front Handle on a Nissan Juke MK1
This video demonstrates how to replace the front handle on a Nissan Juke MK1. First, obtain a replacement handle, which can be found on Amazon, with the code …Read all…
Posted on 15 October 2026 by ScegliAuto
Nissan Juke (2010-2019 / MK 1)
How to Remove the Rear Exterior Handle of the Nissan Juke
Today, we will see the main steps to remove and replace the exterior door handle of the Nissan Juke. First, open the rear door and start by removing the door …Read all…
Posted on 28 June 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (25) Timing belt (7) Onboard computer (7) Checks and maintenance (14) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Rear bumper (1) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (18) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) Tire pressure warning light (22) Service warning light (84) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos