Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Exterior Handle of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Today, we will see the main steps to remove and replace the exterior door handle of the Nissan Juke. First, open the rear door and start by removing the door panel and the upper plastic cover by unscrewing all the fixing screws; once the panel is removed, disconnect the handle cable, then unscrew the three fixing screws with a 10 mm socket spanner, as shown in the video.

At this point, remove and replace the handle from the outside, following the video until the end!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Handle on the Nissan Juke?
How to Replace the External Handle on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the external handle on the Nissan Juke, open the corresponding door to detach the circular rubber cover located on the side of the door: b…
How to Replace the Exterior Wing Mirror on a Nissan Juke
How to Replace the Exterior Wing Mirror on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Here’s how to replace the exterior wing mirror on a Nissan Juke. Use a screwdriver (or plastic trim tool) to remove the door panel inside the car, de…
Removing the Door Panel on a Nissan Juke
Removing the Door Panel on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, learn how to remove the door panel on a Nissan Juke. Remove the small screw cover located in the door pocket, as shown in the video, and unscr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos