Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Juke
  6. : Dashboard

Nissan Juke - Dashboard

Dashboard Nissan Juke (2010-2019 / mk 1)

Nissan Juke (2010-2019 / MK 1)
Where is the OBD2 port of the Nissan Juke located?

To easily find the OBD2 port inside your first series Nissan Juke, you must follow the following guide. First, open the driver's side door and enter the cabin, …Read all…
Posted on 14 March 2025 by ScegliAuto

Airbag (1) Alternator (1) Speaker (2) Antenna (1) Car stereo (8) Roof rack bars (2) Battery (3) Bushings (1) Grille (1) Spark plugs (1) Body (3) Key (25) Timing belt (7) Onboard computer (7) Checks and maintenance (14) Dashboard (1) Shifter boot (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (8) Cabin air filter (15) Fuel filter (1) Diesel fuel filter (7) Oil filter (2) Parking brake (1) Clutch (2) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (3) Starter motor (1) Engine oil (2) Clock (6) Door trim panel (5) Front bumper (3) Rear bumper (1) Brake pads (1) Shift knob (3) Fuel pump (1) Instrument cluster (5) Fuse box (18) Seat (2) Parking sensors (1) Side mirror (1) Rearview mirror (1) Warning light – error code (21) Tire pressure warning light (22) Service warning light (84) Fuel cap (1) Windshield wipers (2) Blower motor (5) Steering wheel (1)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos