Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : How do i change the engine oil of the Nissan Juke?

Nissan Juke - Video tutorial

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Engine oil
Operation: How do i change the engine oil of the Nissan Juke?

To be able to change the engine oil of the Nissan Juke you need to access the lower part of the machine, in correspondence with the engine compartment: here you can locate the oil tank drain plug, which must be unscrewed in order to collect the used oil. inside a suitably positioned container. Next to the tank you will find the oil filter, which must be unscrewed and replaced with a new one; after replacement it will be possible to open the hood and access the components in the engine compartment. Here you will find the vent for topping up, inside which you will need to insert the new oil.


Posted on 7 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Juke 2010-2019 - How much engine oil do you need for a Nissan Juke 1.6? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos