Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance Light on a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Warning light – error code

This brief tutorial shows how to reset the maintenance light, which indicates the engine oil change, on a first-generation Nissan Juke (2010-2019). The operation is very simple and quick, and you can perform it independently after each service. Once the vehicle's instrument panel is powered on, the maintenance light will start flashing. To reset it, press and hold both buttons on the speedometer for about five seconds as shown in the video.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tyre pressure of the Nissan Juke
Resetting the tyre pressure of the Nissan Juke
Nissan Juke (2019-2026 / MK 2) When the load conditions of the Nissan Juke change, you must adjust the tyre pressure values accordingly: for reference, you will find a label on the…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Resetting the service light on the Nissan Juke must only be done after completing the car service operations. The steps to perform the reset are very…
How to Enter the Reset Code for the Nissan Juke Radio
How to Enter the Reset Code for the Nissan Juke Radio
Nissan Juke (2010-2019 / MK 1) To reset the radio in a Nissan Juke, first obtain the unlock code, which is written on the label on the back of the radio. Once you have the code, in…

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - Why did the P / S light come on in the Nissan Juke? Read answer
    • Juke 2010-2019 - What does the red engine light on the Nissan Juke mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos