Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Headlight Bulbs on Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb

Are the bulbs damaged on your Nissan Qashqai? Here’s how to remove them from the front headlamp. Lift the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop. Remove the cap covering the back of the front headlamp. Once the cap is removed, take out the bulb holder from the headlamp. Disconnect the bulb from the plastic bulb holder. Replace the damaged bulbs, and fit the new bulbs into the front headlamp. Cover the headlamp with the previously removed cap. Finally, test the lights.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight on a Nissan Qashqai
How to Remove the Rear Headlight on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Here’s how to remove the rear headlight on a Nissan Qashqai (left side). First, open the rear hatch of the car, then unscrew the screws on the plasti…
Removing the Headlight Bulbs on a Nissan Qashqai
Removing the Headlight Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Need to remove the front headlight bulbs on a Nissan Qashqai? Let’s remove and replace the bulbs. Open the bonnet of the engine compartment, and usin…
Replacing the Position Bulbs of the Nissan Qashqai J10
Replacing the Position Bulbs of the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) In today's tutorial, you will learn how to disassemble and replace the front headlight bulbs, specifically the position bulbs, of the Nissan Qashqai …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos