Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the 2016 Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Headlight bulb

Today we will explain how to replace the rear headlight bulb on a 2016 Nissan Qashqai. To perform this operation, we need to open the trunk of the car and immediately using a combination wrench, unscrew the screws along the side gasket. After removing the screws, we can release the rear headlight, disconnect its connector, and open the dome light cover. We then remove the damaged bulb and insert the new one, proceed to insert the headlight into its housing and tighten the screws. Finally, we close the trunk to test the functioning of the lights.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight of the Nissan Qashqai
How to Replace the Front Headlight of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today, you will learn how to quickly and easily replace the front headlight of a 2017 Nissan Qashqai. The first step is to remove the outer cover of …
How to replace the rear headlight bulb of the 2017 Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today we will explain how to replace the bulb on a 2017 Nissan Qashqai. We start by opening the trunk and unscrewing the locking screws on the outer …
How to Remove the Dipped Beam Light on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Let's see how to remove the front headlight bulbs on the Nissan Qashqai. Open the bonnet by pulling the lever located at the bottom right of the dash…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos