Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Disassemble the headlight bulbs on Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb
Operation: Disassemble the headlight bulbs on Qashqai

To remove the headlight bulbs on Nissan Qashqai? Let's take apart and replace the bulbs, let's see. We open the hood of the engine compartment, remove with a screwdriver the tightening cover placed behind the headlight (right or left). We remove the rear cap from its housing and replace the damaged bulbs with new ones (size and voltage equal). We disconnect the spotlights from the position lights by turning the same from inside the headlight. We mount the headlight access cover cap after replacing all the bulbs. We test the correct operation of the previously mounted bulbs.


Posted on 14 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos