Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the passenger compartment air fan on Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Interior blower
Operation: How to replace the passenger compartment air fan on Nissan Qashqai

The guide shows how to replace the passenger compartment air fan of the Nissan Qashqai produced from 2007 to 2013. The first step is to remove the glove box, which is held in place by six screws. At this point it is necessary to remove the side cheek of the air conditioning column. The passenger compartment air fan is located behind this plastic cover and behind two air conditioning pipes. To remove the rotor it is necessary to disconnect the power supply cable and unscrew a single fixing screw. The extraction may be slightly difficult due to the tubes of the conditioner but, with a little play, it can be extracted. Replacement requires the same steps as up to now but backwards. No specific tools are required for this operation.


Posted on 16 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the problem with the heater fan on Nissan Qashqai from 2088 onwards? Read Answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai cabin fan located? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan located on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why does the fan of the Nissan Qashqai not turn off? Read Answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai's cabin fan not working? Read Answer
    • Qashqai 2014-2022 - What is the noise emitted by the Nissan Qashqai fan due to? Read Answer
    • Qashqai 2014-2022 - Where is the heating fan located on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan on Nissan Qashqai Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos