Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Window Switch Panel on the Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the window switch panel on the Nissan Qashqai, you need to take off the plastic covers that make up the door panel. These are not secured with screws but are all clipped in place, which must be released using a lever tool.

After removing the panel around the handle and the one around the grab handle, you can loosen the bolts securing the switch panel and extract it after disconnecting the relevant connector. At this point, you can fit the new switch panel and reattach all previously removed parts.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) On the first version of the Nissan Qashqai, the window switches were not illuminated. If you want to try these luminous stickers, you can satisfy you…
Nissan Qashqai (2006-2014 / J10) How to remove the door panel with the window motor on a Nissan Qashqai? Before starting the disassembly, disconnect the battery terminals located in …
Nissan Qashqai (2014-2022 / J11) The rear door panel on the Nissan Qashqai has no fixing screws. To remove it, use an object to leverage the various plastic parts that make up the pa…

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos