Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Sun Visor on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

Want to remove the sun visor from the Qashqai? Or do you want to remove the visor clip? Here’s how to do it. Unlock the sun visor and move it to the right or left of the door. Unlock the locking plastic of the sun visor.

Use a screwdriver to unscrew the retaining screws of the brackets (left or right side), disconnect the power connector if applicable. Screw the sun visor to the roof trim panel.

Finally, hook the sun visor into the plastic clip on the right and remove the protective film from the interior mirror. Replace the damaged part with one identical to the one removed.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) To locate the OBD2 port inside your Nissan Qashqai, follow this procedure. First, enter the cabin and ensure your Nissan Qashqai is completely off, t…
Nissan Qashqai (2014-2022 / J11) Before you can start, sit in the driver's seat of your Nissan Qashqai. Begin by gently pulling towards you the lever located at the bottom left of th…
Nissan Qashqai (2014-2022 / J11) Before you can start, sit in the front driver's seat of your Nissan Qashqai. Begin by activating the on-board computer by simply pressing the corresp…

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos