Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Rear View Mirror on a Nissan Almera

Model: Nissan Almera MK 1, N15 - Years: 1995, 1996, 1997, 1998, 1999, 2000
Part: Rearview mirror

See other generations:
Video tutorial

Replace the interior rear view mirror on a Nissan Almera. Like many other car models, this task is very simple and suitable for even the least experienced mechanic.

In the area where the mirror is mounted on the "headlining" of the car, you will notice a cover that you can easily remove by hand. If you encounter difficulties, use a flat screwdriver or a plastic trim tool to assist you. Once the cover is removed, you will see three screws: simply unscrew these screws to completely detach the mirror.

To install the new one, position it correctly and reinsert the screws.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the Nissan Almera
Replacing the Timing Chain on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Here are the main instructions for replacing the timing chain on the Nissan Almera. First, open the bonnet of your car and start by removing the batt…
Guide to Replacing the Radio in the Nissan Almera
Guide to Replacing the Radio in the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Today, let's go through the instructions for removing and replacing the standard radio in the Nissan Almera in simple, quick steps. First, get in the…
Replacement of External Wing Mirror
Replacement of External Wing Mirror
Nissan Almera (2000-2008 / N16, MK 2) To remove the external wing mirror, you must also take off the door panel to disconnect the connector for the mirror adjustment button. Then remove t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos