Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump from a Nissan Altima

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel pump

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the fuel pump or float on a Nissan Altima by following these simple and quick steps. First, access the rear of the vehicle and start by removing the rear seat.

Then, take off the fuel pump cover, disconnect the fuel line and the electrical connector as shown in the video. At this point, unscrew the pump ring to extract it from the tank; then replace it with the new one, using the original part, and reassemble everything, making the connections!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Nissan Altima?
Where are the fuses located in the Nissan Altima?
Nissan Altima (2013-2018 / L33) In the Nissan Altima, the fuses are divided among three fuse boxes located inside the vehicle. The first is installed in the cabin, behind the plasti…
How to Replace the Throttle Body on the Nissan Altima
How to Replace the Throttle Body on the Nissan Altima
Nissan Altima (2002-2006 / L31) In today's tutorial video, you will see how to disassemble and replace the throttle body on the Nissan Altima with a gasoline engine. First, open the…
Where Are the Fuses in the 2013 Nissan Altima?
Where Are the Fuses in the 2013 Nissan Altima?
Nissan Altima (2013-2018 / L33) The fuses in the 2013 Nissan Altima are located inside three fuse boxes. The first fuse box is found inside the cabin, specifically behind the driver…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos