Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Float in a Nissan Altima?

Model: Nissan Altima L32 - Years 2007-2012
Part: Fuel pump

In this tutorial, you will see how to access the fuel float in a Nissan Altima to replace it. This is a straightforward operation, but it requires disassembling the entire pump. First, ensure the key is not in the ignition. Then, open the hood, remove the indicated fuse, and disconnect the negative battery terminal for safety. Next, lift the rear seat cushion, open the center cap, and disconnect both the fuel lines and the power connector. At this point, you can unscrew the outer ring, remove the pump, and proceed with replacing the float.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Pump from a Nissan Altima
Removing the Fuel Pump from a Nissan Altima
Nissan Altima (2013-2018 / L33) In today's tutorial video, you will learn how to remove and replace the fuel pump or float on a Nissan Altima by following these simple and quick ste…
Where to Find the Fuse Box of the 2004 Nissan Altima
Where to Find the Fuse Box of the 2004 Nissan Altima
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …
How to replace the engine air filter of the 2017 Nissan Altima
How to replace the engine air filter of the 2017 Nissan Altima
Nissan Altima (2013-2018 / L33) To correctly replace the engine air filter in your 2017 Nissan Altima, simply follow the steps described in our new guide. Fortunately, this is a rat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos