Do it yourself
Frequently asked questions about cars and motorcycles

How to Install an Alarm on a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Checks and maintenance

To install an alarm on the Nissan Qashqai, remove the plastic panel located under the steering column to access the OBD port. This must be removed from its housing using a screwdriver to access the internal cables. Cut the cables to install a connector as shown in the video at the midpoint of the cables: this way, a false OBD port will be visible under the vehicle, preventing connection to the ECU to steal the car.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) The Nissan Qashqai has two fuse boxes installed inside it. The first fuse box is located behind the driver's side glove compartment. The second fuse …
Nissan Qashqai (2006-2014 / J10) The fuse boxes of the Nissan Qashqai serve to contain the fuses that regulate the operation of the devices installed on the vehicle: in this type of …
Nissan Qashqai (2006-2014 / J10) In order to install the roof racks of the Nissan Qashqai, you first need to mount them by inserting the supports located at the ends of the bars. The…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the oil dipstick on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Why does the cruise control of the Nissan Qashqai not work? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos