Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Fuel pump alarm on Nissan Qasqhai.

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J12 - Years 2021-2024
Part: Fuel pump
Operation: Fuel pump alarm on Nissan Qasqhai.

An ingenious (although not very comfortable) anti-theft system for the Nissan Qashqai, Install a switch on the fuel pump. We need to cut the connection to the fuel pump. We have to disassemble the air intake pipe, so that we can access the fuse box, we open it and lift the engine control unit. We have to follow the white thread that you see in the video. But be careful, because there are two white ones: a thick one and a thin one. We don't have to take that more often. We will have to break this wire and reconnect it to bring it inside the car (we will have to pass it through the rubber that is behind the car horn siren. It will be necessary to make a small hole to pass the wire through. This is not illustrated in the video ). we get an on/off toggle switch (which costs a few euros on all e-commerce platforms) and connect it to the wire. We must then hide it in a place that is not very visible, and that we will have to remember to operate every time before restarting the car.


Posted on 25 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2014-2022 - What are the problems with the fuel pump on the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What problems could the faulty diesel pump give in the Nissan Qashqai? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos