|
Do it yourself
| |||
| ||||
How a Water Pump Can Cause Timing Belt Failure on a Nissan Qashqai
Model: Nissan Qashqai
J11
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
This video demonstrates how the installation of an inadequate water pump can lead to the failure of the water pump on a Nissan Qashqai J10 with a 1.5 DCi K9K engine. The pump shown by the YouTuber has seized, causing it to lose teeth, which resulted in the timing belt breaking and causing significant damage to the engine, requiring a complete head replacement. It is crucial that when the timing belt is changed, the water pump is also replaced, which is relatively inexpensive but can cause severe damage if it fails, as in this case. As seen in the engine, the intake and exhaust valves have bent, and the timing has been lost. The YouTuber advises that when purchasing a used vehicle, do not rely solely on what is written on the belt but insist on verification with the workshop invoice to ensure the work was done at the specified mileage and that the water pump was also changed. The repair should be carried out by a specialised workshop and is not suitable for a simple DIY enthusiast.
Updated on 6 October 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
How do you remove the timing belt from a Nissan Qashqai? Lift the car on a column lift or jack, remove the undertray and the timing belt cover. Use a…
Nissan Qashqai
(2006-2014 /
J10)
Let’s see the replacement of the timing belt on a Nissan Qashqai. Lift the car on a column lift and remove the front wheel with a screwdriver, then t…
Nissan Qashqai
(2006-2014 /
J10)
How to replace the timing belt on a Nissan Qashqai? Lift the car on a column lift, remove the front wheel and the right wheel arch liner. Once these …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |