Do it yourself
Frequently asked questions about cars and motorcycles

How and When to Replace the Timing Belt on the Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Timing belt

Discover in this video the step-by-step instructions for removing and replacing the timing belt, and when to change it, on the Nissan Qashqai 1.5 DCI. The timing belt replacement on the Nissan Qashqai 1.5 DCI should be done approximately every 93,000 miles or five years; it is advisable to carry out a visual inspection a little before this mileage to check its condition. At this point, the complete procedure for removing and replacing the belt is illustrated; after removing the engine mount and the timing cover, take the references to replace the belt!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) Today's procedure will show us how and when to remove the timing belt of the Nissan Qashqai 1.5 dCi; the manufacturer states that the timing belt on …
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…
Nissan Qashqai (2006-2014 / J10) Before you can start, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch. After that, open the engine bonnet, then …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - When to replace the timing belt on the Nissan Qashqai 1.5 dCi? Read answer
    • Qashqai 2014-2022 - Cost of changing the timing belt on the Nissan Qashqai 1 5dci? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos