Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to reset the service on the Nissan Navara?

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: -board computer
Operation: How to reset the service on the Nissan Navara?

When it is necessary to reset the service warning light on the vehicle, follow the steps below: access the driver's seat and turn on the ignition, locate the "menu" command on the left-hand side steering wheel and press it to scroll through the various functions until you reach the item " settings ". Subsequently, with the arrow command "up and" down "scroll to the item" maintenance ", then press the command" enter "and scroll the items with the arrow command" down "until the item" oil filter "is highlighted. than select the item "reset" and with the arrow commands go to "yes". Finally, press the "enter" key again to carry out the reset.


Posted on 5 May 2024 by ScegliAuto



How to reset the service on Nissan Navara
Nissan Navara (2014-2023 / D23) To reset the service on the Nissan Navara, after having actually performed the required services, we must get on the vehicle, close the doors and tur
How to reset service warning light on a Nissan Navara
Nissan Navara (2005-2015 / D40) Let's see in this video how to reset and reset the service on a Nissan Navara. We turn on the instrument panel of our car with the appropriate remote
How to reset the Nissan Navara service light
Nissan Navara (2005-2015 / D40) Resetting the Nissan Navara's service light is really child's play and takes just a few seconds to complete the entire procedure. Just follow the ins

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos