Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Sunny
    4. : How to replace the spark plugs of the Nissan Sunny?

Nissan Sunny - Video tutorial

Model: Nissan Sunny N17 - Years 2011-2020
Part: Spark plugs
Operation: How to replace the spark plugs of the Nissan Sunny?

In order to replace the spark plugs of the Nissan Sunny you need to open the hood, so that you can loosen the screws that secure the air filter box and those that secure the intake manifold. Once all these screws have been loosened, both pieces can be removed to access the injectors under them. These must be disconnected from the coil and released from their fixing screws, extracting them from their housing. When the old injectors have therefore been removed, it will be possible to remove the spark plugs below, replacing them with the new ones.


Posted on 25 May 2024 by ScegliAuto



How to replace the spark plugs in a 2003 Nissan Sunny?
Nissan Sunny (2000-2005 / N16) After opening the front hood, we remove the four screws of the ignition coils in order to remove them, also disconnecting the plugs. We take the appr
How to replace the suspension arm of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Let's see today the steps on how to disassemble and replace the suspension arm of the Nissan Sunny, following the instructions below. First we lift t
How to replace the cabin filter in a Nissan Sunny?
Nissan Sunny (2011-2020 / N17) In this tutorial, we can see how to replace the cabin filter in the Nissan Sunny, an extremely simple and fast operation. First of all, let's positio

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos