Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Sunny
    4. : How to replace the Nissan Sunny headlight bulb?

Nissan Sunny - Video tutorial

Model: Nissan Sunny N17 - Years 2011-2020
Part: Headlight bulb
Operation: How to replace the Nissan Sunny headlight bulb?

In order to replace the headlight bulb of the Nissan Sunny you have to go to open the hood, so that you can access the components inside the engine compartment. Here, in the rear part of the headlight, there will be the connector connected to the bulb, which will have to be disconnected. When the connector has been removed, it will be possible to go and extract the old bulb from inside its housing, so that it can be replaced with a new spare part. This will need to be connected and inserted into the headlight, closing the hood and checking that everything is working properly.


Posted on 26 April 2024 by ScegliAuto



How to replace the rear headlight bulbs in the Nissan Sunny?
Nissan Sunny (2011-2020 / N17) As we can see in this tutorial, replacing the rear headlight bulbs of the Nissan Sunny is an extremely simple and fast operation. First of all, make
How to remove the rear lights in the Nissan Sunny?
Nissan Sunny (2011-2020 / N17) In this tutorial we can see how to remove the rear lights in the Nissan Sunny, a very simple operation, to be carried out in case we need to replace
How to replace the suspension arm of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Let's see today the steps on how to disassemble and replace the suspension arm of the Nissan Sunny, following the instructions below. First we lift t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos