|
Do it yourself
| |||
| ||||
How to Replace the Key Battery of a Nissan Qashqai
Model: Nissan Qashqai
J11
- Years 2014-2022
When the remote battery is flat, you need to follow a few steps to replace it. In this guide, you will see how. Start by pulling the lever that allows you to slide out the key, as shown at minute 5:05. On the edge from which you extracted the key, you will see two slots; use a screwdriver to pry. This will allow you to open the remote, separating the two halves. In one half, you will find the circuit board, and in the other, you will find the battery. Use the screwdriver to remove the old battery and insert the new one with the positive terminal facing up, ensuring it is secured correctly in the metal tab. Now, simply reassemble the two halves of the remote, aligning them properly and snapping them into place with a gentle press.
Updated on 31 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
In this guide, we will explore the steps to disassemble and replace the battery of the remote key for the Nissan Qashqai. First, take your remote and…
Nissan Qashqai
(2021-2026 /
J12)
On the Nissan Qashqai, the replacement of the key battery starts from the emergency metal key: in the video, it is removed from the remote and set as…
Nissan Qashqai
(2006-2014 /
J10)
To replace the key battery on a Nissan Qashqai J10, locate the tiny screw on the bottom of the key and open it to access the battery. You will need a…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.158
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |