Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the Nissan Qashqai remote control key battery

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Battery
Operation: How to replace the Nissan Qashqai remote control key battery

Let's find out in this guide the steps that will allow us to disassemble and replace the battery of the remote control key of the Nissan Qashqai. First we take our remote control in hand and begin to remove the physical key from inside it, by sliding the side button; then we pry the back cover to remove it, thus accessing the battery compartment, as shown in the video. At this point we replace the battery with the new one, of the right type (in this case a 3V CR 2032); insert the battery in the correct direction and then assemble the key!


Posted on 21 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - What problems does the Nissan Qashqai's Start & Stop have? Read Answer
    • Qashqai 2014-2022 - What does the message "System Error" on the Nissan Qashqai mean? Read Answer
    • Qashqai 2014-2022 - What does chassis control system failure mean on a Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What to do if the Nissan Qashqai does not start? Read Answer
    • Qashqai 2014-2022 - What to do in case Start and Stop is faulty on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How much is the battery for the Nissan Qashqai 1.5 dci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos