Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

This brief guide will show you how to disassemble and replace the battery in the key fob for the Nissan Qashqai. First, take your key fob and pry open the side slot to separate it into two parts, accessing the circuit board and battery.

Then, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V), as shown in the video. Once the battery is inserted the right way round, you can reassemble the key fob, finally checking the operation of the locking and unlocking buttons!


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Nissan Qashqai
How to Replace the Key Fob Battery of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Briefly review the steps to disassemble and replace the battery of the Nissan Qashqai key fob. First, take your key fob and remove the physical key f…
How to Replace the Car Remote Battery on a Nissan Qashqai
How to Replace the Car Remote Battery on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, we will explain how to independently replace the car remote battery on a Nissan Qashqai model J10 in just a few minutes. To perform the replac…
Replacing the Key Fob Battery for the Nissan Qashqai
Replacing the Key Fob Battery for the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this guide, you will see the procedure needed to disassemble and replace the battery in the key fob for the Nissan Qashqai, in simple and quick st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos