Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Key Fob Battery for the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

In this guide, you will see the procedure needed to disassemble and replace the battery in the key fob for the Nissan Qashqai, in simple and quick steps. First, take your key fob and pry open the small slot on the side using something thin like a flat screwdriver to remove the back cover of the fob; then remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V), as shown in the video.

Finally, reassemble the fob and test its functionality!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) Today, we will explain how to independently replace the car remote battery on a Nissan Qashqai model J10 in just a few minutes. To perform the replac…
Nissan Qashqai (2006-2014 / J10) Today we will explain how to replace the battery in the Nissan Qashqai remote control following a malfunction. To replace the battery, we need to pre…
Nissan Qashqai (2014-2022 / J11) Here are the steps and instructions that will allow you to disassemble and replace the battery of the key fob for the Nissan Qashqai. First, take you…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos