Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Nissan NV200

Model: Nissan Nv200 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

Video tutorial

To reset the service light on the vehicle, proceed as follows: access the driver's seat and turn the key to switch on the ignition. Locate the left button on the instrument panel below the odometer, press it several times until the "service" indication appears, then press the button again and turn it clockwise to select "maintenance". Press the button again and turn it clockwise until you reach "assistance", press the same button again and, still turning it clockwise, select "reset". At this point, press the button and turn it clockwise until you select "confirm". This will turn off the service light.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Nissan NV200 van?
How to reset the service light on the Nissan NV200 van?
Nissan Nv200 (2009-2024 / MK 1) Resetting the service in the Nissan NV200 van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must…
Resetting the Service Light on the Nissan NV200
Resetting the Service Light on the Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) To reset the Service light on the Nissan NV200 after changing the engine oil, sit in the driver's seat, press the lower left button on the speedomete…
How to Reset the Service Light on a 2016 Nissan NV200
How to Reset the Service Light on a 2016 Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) Resetting the service light on a Nissan NV200 is an important task that is also very simple and quick, to set the next mileage for the service. To re…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos